" A PRACTICAL SOLUTION .."
universal systems - Both the PREMIUM and the COMFORT System are easy to connect to any type of dental unit: A-dec, Anthos, Belmont, Cart, DKL, EpiLux, HEKA [Unic, Unicline, Unicline-S], KaVo, Midmark, Morita, Planmeca, Sirona [INTEGO, Sinius, C245+], Stern Webber, Tridac, Ultradent, Q-dent, XO ... etc. See examples below, in the above picture gallery and also in the table showing integration options further down below.
start sets - Yirro-plus start sets offer you a sufficient number of handles and mirrors in order to work for several hours according to Hygiene Rules. Additional handles and mirrors are separately available.
plug & play - The Yirro-plus system is to be installed independantly to the compressed air. The relevant connection supply is included in the start set.
This universal docking is included in any start set [PREMIUM or COMFORT]. It is practically always possible to mount the universal docking on a vertical surface at the side of the delivery unit. Even in case of a small brim. [Shown here: Sirona Sinius unit]:
STANDARD ADAPTOR DOCKING
QUICK CONNECTOR NW 2.7
Quick connector - The COMFORT NW start set not only includes a T-part for air connection, but also a quick connector NW 2.7. [See picture below].
In case your unit has an external air point type NW 2.7, you can 'plug in' the COMFORT NW system without the intervention of a technician. In many cases, the external air point is present on the delivery unit, where the hoses enter the unit. Some units provide an external air point on the base. A Cart unit in regular has air acces on the outside.
If you think about the creation of an external air point NW 2.7 then you should consider the separately available external connection set NW 2.7 [image below]. Your technician can construct the external air point at any position you indicate.
QUICK CONNECTOR POLYMALE
QUICK CONNECTOR - The COMFORT Polymale start set not only includes a T-part for air connection, but also a quick coupling Polymale 1/4". [See picture below].
In case your unit has an external air point 1/4", you can 'plug in' the COMFORT Polymale system without the intervention of a technician. In many cases, the external air point is present on the delivery unit, where the hoses enter the unit. Some units provide an external air point on the base. A Cart unit in regular has air acces on the outside.
Did you previously purchase an Air abraision set [Danville or EMS]? Then your unit already has 1/4 " air access.
If you are considering the installation of an external 1/4 "air point, check the separate available Poly Female connection set [see image below] .
Your technician can connect an air point 1/4" at any position you indicate.
exeptions - In some situations it is not possible to use the included docking and adaptor to place the system at the delivery unit.
For HEKA-units, Epilux units, Sirona C2+, C4+, C5+, Sirona SINIUS, Sirona Intego, Sirona Teneo, Cattani , Midmark , Planmeca, XO and for TopCart; special INTEGRATION adapter dockings are available.
Ask your dealer for these adaptors are not standard included in start sets. Examples of the most important situations are shown beneath and summarized in our Integrationtable.
This Mobile docking holder with integrated 16 mm extension provides a better access of the docking station in case of a brim >12 mm as is the case with Sirona Teneo / Sirona C3+.
If you work on a TopCart unit, this Extension docking provides more space to manipulate the toggle switch [COMFORT].
Ask your dealer for the Yirro-plus Mobile EXTENSION docking holder [article 0330] or contact us directly.
For dental units that have their delivery placed at a ø22 mm tube on the bracket arm, the Tube-docking clip ø13mm/ø22mm is applicable. This is a practical integration solution for Epilux units.
In order to mount the docking on smaller tubes [ø13mm - like Cart], the co-supplied white inner part can be mounted.
Ask your distributor for the Yirro-plus TUBE-docking holder ø13/22 mm [article number 0291].
The tube-docking ø13/ø22 mm is separately available and was developed to place the Yirro-plus system near the suction on a tube of ø13 or ø22 mm.
To integrate in HEKA delivery units with a spare slot, HEKA-UNIC-S Docking and HEKA-UNICLINE Dockings are available.
The above image shows the HEKA-UNIC-S docking. Ask your dealer - this docking is not standard included in start sets. [Article 0323].
HEKA-UNIC-S DOCKING EXAMPLE
To integrate in HEKA delivery units with a spare slot, HEKA-UNIC Docking and HEKA-UNICLINE Dockings are available.
This image shows the HEKA-UNICLINE docking.
Ask your dealer - this docking is not standard included in start sets. [Article 0405].
All three slots occupied?
Do not worry, we have thought of everything: Ask for the HEKA-UNICLINE-SIDE docking [article 0499]. This is the ideal solution for HEKA-users, to make use of Yirro-plus together with the Isolite System....
HEKA-UNICLINE DOCKING EXAMPLE
Example of integration on a HEKA-UNICLINE delivery unit by use of the HEKA-UNICLINE docking on the delivery unit. Simply place this docking into the spare slot and mount the Yirro-plus air-regulator to it according to the instructions.
The HEKA-Unicline docking has article number 0405.
To integrate Yirro in the spare slot of the Sirona INTEGO, Sirona C2+, C4+, C5+ and Sirona SINIUS delivery units, 2 separate dockings are available: the Sirona C245+ docking [left] and Sirona INTEGO docking [right]. For the specific situations see table and below:
SIRONA INTEGO INTEGRATION EXAMPLE
Note: The Sirona INTEGO docking is developed for use in 3trd slot of the INTEGO delivery unit.
Ask your dealer for the Sirona INTEGO docking [article 0720], it is not standard included in the start set.
SIRONA SINIUS INTEGRATION EXAMPLE
Note: The Sirona C245+ docking is developed for use in 4th slot of the SINIUS delivery unit.
Ask your dealer for the Sirona C245+ docking [article 0473], it is not standard included in the start set.
Alternative integration is possible to mount the universal docking at the side of your delivery unit.
SIRONA C4+/C5+ INTEGRATION EXAMPLE
The Sirona C245+ docking was developed for the small slots of the Sirona C4+ and C5+ delivery units. For optimal ergonomics, the Yirro-adapter is preferrably positioned in the 1st slot, thus offering maximal freedom of movement for both dentist and assistant. Consequently, the automatic ON/OFF switch of the small suction needs to be transferred to the 3rd slot.
You can consult your technician for this service. You need to separately order the Sirona C245+ docking [article 0473], it is not standard included in the start set.
If you don't want any changes made to your delivery, you should consider the possibility to mount the universal docking aside the delivery unit.
SIRONA C2+ INTEGRATION EXAMPLE
Note: The Sirona C245+ docking is developed for use in 3rd slot of the C2+ delivery unit.
Ask your dealer for the Sirona C245+ docking [article 0473] it is not standard included in the start set.
Alternative integration is possible by use of the included standard docking adaptor in the 4th slot. [See picture below] or you can choose to mount the universal docking at the side of your delivery unit. In case of a large brim [> 12 mm] make use of Mobile EXTENSION docking holder [article 0330].
PLANMECA COMPACT [RECENT MODEL]
For Planmeca Compact assists from the 'recent model', a Yirro-plus Planmeca SIDE docking holder is available, which can be mounted at the side of the delivery in the two slots.
The Yirro-plus Planmeca SIDE docking holder [art 0464] is not included in the start set and needs special ordering.
PLANMECA COMPACT [RECENT MODEL]
Picture below shows that it is also possible to mount the system by use of standard included parts:
a] either by placing the docking at the side of the instrument unit [picture 1] or
b] by use of the extra ring together with the standard adaptor docking, in a spare slot of the assistance unit [picture 2] - this is also applicable for previous versions of Planmeca Compact deliveries.
PLANMECA COMPACT [PREVIOUS MODEL]
For the most recent type of XO Flex assistance units, the XO-2 docking holder is applicable, see picture above. [Alternatively, the mobile docking holder [included in startset] can be mounted on the vertical surface as indicated above.]
This XO-2 Flex docking holder is separately available. Ask your dealer or contact us directly for article 0548.
For the elder type of XO units, the XO-1 docking holder is applicable, see picture below for an impression. The XO-1 docking holder is a perfect option to place the Yirro-plus docking between the suction.
This docking holder [article 0750] is not standard included in the start set. Order it through your dealer or contact us directly.
For Galbiati units the C1-docking is applicable. It fits in the smallest slot of the Galbiati assists, see above.
The C1 docking [article 0491] is not included in the start set and needs special ordering.
See below picture; application example of the C2 docking.
The mobile docking holder [art. 0518] is used to mount the universal docking on a vertical surface such, that screws are invisible.
Additionally, the mobile docking holder enables the user to transport a Yirro-plus COMFORT set from one dental unit to another, provided that at both units, an external air points is available.
The mobile docking holder is separately available.
Seperate female quick coupling sets, useful to create external air points are available; in the European NW type or in the Poly-female type [Asia, USA]. Ask your dealer or contact us directly.