telefoondikgrijsemailGRIJSdiklogo2017grijswit 

logoYirroRGB200
  • vlagUnitedKingdom
    • vlagFrankrijk
    • vlagDuitsland
    • vlagNL

"I WORK MUCH FASTER THAN BEFORE ..."

handle0grey3 cleaningbox1 noSPOTcap1 handgrepen1 docking0grey1 crossedhandles02grey1 pedaalgrijs1024d1

pictokrant26

THE PREMIUM START SET

The Yirro-plus® PREMIUM system offers you automatic switching: Taking out the mirror immediately starts the air flow and it stops as soon as the mirror is placed back into the docking station. The air flow is regulated by a turn knob.

The Yirro-plus® PREMIUM Start Set offers all you need to work for several hours according to Hygiene Rules. A practical manual is included in the package, along with installation instructions.

Premium2017doos4500px

Yirro-plus® PREMIUM Start Sets contain:

- 4 handles and 4 mirrors [2 x 2 sizes]
- 1 regulator with automatic magnet switch sensor / air coupling
- 1 docking station with universal docking / adapter docking for integration on spare slot [if applicable]
- 1 user manual & installation instruction
- 1
cleaning box for protected cleaning of 6 mirror heads
- 4
noSPOT caps for prevention of 'solid spots' on mirror heads
- Power/Air box + hose [connection to 24 VDC]
- medical power supply EN 60601 [converts 100/240 Volt to 24 VDC]
- air connection supply [T- ø6 mm]

The PREMIUM system is to be installed independant to your compressed air [3-6 bar] and to 100/240VAC or to 24VDC. All relevant connection supply is included. Any questions? Check our FAQ's

pictokrant27

THE COMFORT START SET

The Yirro-plus® COMFORT system is switched manually: You take out the mirror from the docking station and switch it ON and OFF by a toggle switch. The air flow is regulated by a turn knob. This system is easy to install by any dental technician.

With the Yirro-plus® COMFORT Start Set you can start working immediately: it offers all you need to work for several hours according to Hygiene Rules. A practical manual is included in the package.

Comfort2017doos4500px

Yirro-plus® COMFORT Start Sets contain:

- 4 handles
- 4
mirrors [2 x 2 sizes]
- 1 regulator with manual ON/OFF toggle-switch / air coupling
- 1 docking station with universal docking / adapter docking for integration on spare slot [if applicable]
- 1 user manual & installation instruction
- 1
cleaning box for protected cleaning of 6 mirror heads
- 4
noSPOT caps for prevention of 'solid spots' on mirror heads
- air connection supply [i.e. T ø6 mm and quick coupling for NW 2.7 or Poly male connection -
depending of the preferred type]

plug & play - The COMFORT system is to be installed independantly to your compressed air [3-6 bar]. All relevant connection supply is included in the start set.

Any questions? Check our FAQ's

pictokrant28

MIRRORS

Yirro-plus® mirrors are ultra-reflective and grease repellent. Each start sets contains a total of 4 detachable and reusable mirror heads in 2 different sizes. Due to a very compact shape these mirrors offer you a comfortable indirect view in the most extreme working conditions ...

symmetrie2typeslichter2

pictokrant29

HANDLES

ergonomic grip - Yirro-plus® handles enable a perfect ergonomic grip due to their shape and light weight of 7 grammes. Each start sets contains a total of 4 detachable and reusable handles. The practical magnet coupling ensures a leak-free air connection and is easy to pull apart by a light hand pull.

Handles are to be cleaned by thermo-disinfector and additional autoclaving OR by ultrasonic cleaning and additional autoclaving. Handles are separately available in 6-packs.

Grijsassemblyhandgripsweb2

pictokrant30

MIRRORS no. 0

Yirro-plus® no. 0 mirrors are extremely compact [width 13,2 mm] and offer more space for your other instruments. The mirrors are to be desinfected by thermo-disinfection and can be sterilized by additional autoclaving. Alternatively cleaning by ultrasonic cleaning and sterilization by additional autoclaving. Mirrors are separately available in 6-packs.

NOTE: For disinfection and cleaning it is strongly recommended to use the Cleaning box [thermo-disinfection / ultrasonic cleaning] and for sterilisation it is recommended to cover the [cleaned] mirror surfaces with noSPOT autoclave caps - exclusively for autoclaving.

triade0RGBtoplb2

pictokrant31

MIRRORS no. 2

Yirro-plus® no. 2 mirrors are more compact than regular round mirrors. Width of this mirror is 18,4 mm, the mirrors are to be cleaned by thermo-disinfection and can be sterilized by additional autoclaving. Alternatively cleaning by ultrasonic cleaning and sterilization by additional autoclaving. Mirrors are separately available in 6-packs.

NOTE: For cleaning it is strongly recommended to use the Cleaning box [thermo-disinfection / ultrasonic cleaning] and for sterilisation it is recommended to cover the [cleaned] mirror surfaces with noSPOT autoclave caps - exclusively for autoclaving.

triade2RGBtop2lb2

pictokrant32

ACCESSOIRES

Cleaning accessoires - Since it is necessary to clean mirrors and handles separately, a series of special accessoires have been developed: a cleaning box and a 4-position nozzle adaptor, for a protected cleaning process in thermo-disinfector and ultrasonic cleaner.

In order to prevent the HR mirror surface from deposit of solid spots during autoclaving, the special noSPOT autoclave caps have been developed.

Other accessoires - For improved convenience, a foot pedal is available for PREMIUM users, for ON/OFF switching of the air flow in between your treatment. For better integration of the COMFORT set onto external air connection, a female quick coupling set is available.

pictokrant33

CLEANING BOX

Each start sets contains the Yirro-plus® Cleaning box, developed for protected cleaning of 6 mirror heads and suitable for thermodisinfection or for ultrasonic cleaning.

reinigingsbox6posvrij

NOTE: For additional sterilisation is recommended to use noSPOT autoclave caps, in order to prevent 'solid spots' on the mirror surface. A combined use of the autoclave caps together with the cleaning box in the autoclave is possible.

Any questions about cleaning? Check our FAQ's.

pictokrant34

'noSPOT' AUTOCLAVE CAPS

During autoclave process, inevitable traces of contamination in the water are known to cause solid spots on dental instruments. ‘Solid Spots’ on High Reflective dielectric mirror surfaces are very difficult to remove. KEEP YOUR MIRRORS IN TOP CONDITION BY USING ‘noSPOT’ AUTOCLAVE CAPS: no-SPOT technology allows the mirror surface to remain accessible for steam but prevents droplet formation.

autoclavecap29view3

Any questions about cleaning? Check our FAQ's.

pictokrant35

4-POSITION NOZZLE ADAPTOR

The hollow handles fit the pens of the thermo-disinfector and are resistant to sterilization by autoclave. By using this 4-position nozzle adaptor you can make economic use of the rare space.

PA190086greyweb2

Any questions about cleaning? Check our FAQ's.

pictokrant36

FOOT PEDAL

This optional foot pedal offers PREMIUM users a practical solution to switch ON/OFF the air flow in between treatments without having to place back the mirror in the docking.

Especially the microscope dentist or endodontist will benefit from this option.

ASMpedaalASAview3

The Yirro-plus foot pedal is very easy to install by the user. [See instructions at downloadpage.]

pictokrant37

FEMALE QUICK COUPLING SET 'NW 2.7'

Only suitable for the COMFORT NW system. With this accessoire it is possible to create an external air connection on your dental unit. The package contains a NW 2.7 female coupling, a hose and a T-part ø6 mm and an instruction for installation. The quick coupling for plugging into this female external connection is included in the COMFORT NW 2.7 set.

Any questions about quick couplings? Check our FAQ's.

FemalequickcouplingsetNW27ASS2

pictokrant38

FEMALE QUICK COUPLING SET 'POLY'

Only suitable for the COMFORT Poly Male system. With this accessoire it is possible to create an external air connection on your dental unit. The package contains a Poly female coupling, a hose and a T-part ø6 mm and an instruction for installation. The quick coupling for plugging into this female external connection is included in the COMFORT Poly Male set.

Any questions about quick couplings? Check our FAQ's.

Polyconnectionsystem2

© DHM-dental 2018

DHM-dental is a manufacturor of Class I medical devices for the dental branche. All our products are produced in compliance with EEG 93/42 Regulation, including GMP and a quality system in view of EN/ISO 13485.

GENERAL TERMS

logo2017grijswit logodef201770pxwit